Build Outdoor Firewood Rack Your Own
Outdoor Firewood Rack – A wood-burning rack provides a place to store a large amount of firewood in a garage, porch, basement or backyard. A wood-burning rack is easy to make from the lumberyard and is cheaper than buying one. This design can be made larger or smaller to fit any area.
Cut two pieces of 2×4 21-inch wood. Stand two 2×4 of 8 feet on the side of 2 inches and parallel, 21 inches apart from each other. Align the 21-inch pieces with the ends of the 8-foot pieces. That is to make a rectangle with the 4-inch side of the 2×4’s facing outward. Apply the wood glue. Cut two pieces of 2×6 and 2×2 six to 21 inches. Place the 2×6 pieces on top of the rectangle base of stage 1, with a 2×6 on each edge. Attach the 2×2 pieces from stage 2 to the rectangle base with wood glue and a wooden screw at each end.
Cut four pieces of 2×4 to 48 inches and eight-plus 2x2s to 21 inches. Place the 4-inch side of the 48-inch 2×4 vertically to the 21-inch confines of the rectangular base. Place four 2x2s evenly spaced on each of the vertical sides in the same way that you connected the 2x2s to the base of the rectangle. Cut two squares off the 12-inch plywood board, then cut them in half at the corners to make four right-angled 12-inch triangles. The triangles add support to the vertical sides to prevent them from falling.